Looking after your pool isn’t hard if you do it regularly. Just set up an easy cleaning plan that matches your pool’s size and type.
When you swim, the water should always appear clear and fresh. The correct maintenance avoids such predictable issues as the growth of algae and equipment breakage. When you take the right way, pool maintenance will be fast and simple and not a task.
With these helpful tips, you will be able to get crystal clear water every time without having to blow hours on maintenance.
5 Things to Do to Keep Your Pool Healthy and Clean
- Test and Balance Pool Water Regularly
You should monitor your swimming pool regularly in order to make the swimming water safe and clean. The advised level of chlorine does not allow popular growth of germs and causes water transparency.
The water should be studied at least twice in a week, either using ordinary test strips or a testing set. The chlorine must remain 1.0 to 3.0 at its optimum level. The PH also matters as much and should be set at 7.2-7.6 to avoid getting your eyes irritated and damaging your pool equipment.
The levels may be problematic, and in this case, you may add chemicals to correct them. When chlorine is low, put more to kill bacteria. Once the pH is too high or low, then balance it with special products. Regular testing will also ensure you notice the problems when they are not severe.
- Clean the Pool Skimmer and Pump Basket
You should clean your pool skimmer and pump basket every week to keep your pool working well. Leaves and dirt get caught in these parts and can cause problems if not removed.
When the skimmer and basket are full, water cannot flow properly through your pool system. This makes your pump work harder and can lead to expensive damage.
Remove the basket and empty all the trash you have found inside. Shake off as much water as necessary before returning it. By occasionally doing this simple task, you’ll keep your pool clean and save money.
If you don’t have time to do this, a swimming pool cleaning service can help. We will clean these parts properly and check for other issues too.
- Brush and Vacuum the Pool Walls and Floor
It is advisable to clean your pool once a week by brushing and vacuuming it.
Brushing sweeps away the dirt and algae on the walls and the floors. Debris that gets on the bottom is picked through vacuuming. Apply the appropriate brush on your pool surface without damaging it.
Manual vacuums are connected to your own filter system, whereas the automatic ones clean themselves. Always use the brush, then vacuum to loosen the dirt readily cleaned by the vacuum. This kind of periodic cleaning will stop the reproduction of algae and make water free of them.
Clean surfaces help pool chemicals work better, too. Spending time on this weekly task means fewer problems later and more enjoyable swimming all season.
- Properly Maintain Pool Filter
Keeping your pool filter in good condition is important for clean and healthy water. You should clean your filter every week or two, with a more thorough cleaning every month. Sand filters require backwashing when the pressure gauge shows readings higher than normal.
Cartridge filters need regular rinsing with a garden hose and complete replacement every couple of years. DE filters need to be cleaned and backwashed, and DE powder added when cleaning up. Failure to maintain your filters causes bad water and an additional burden to your pool gears.
Even home renovation projects in your area need to be planned in such a way that construction waste can enter your filter system and filter it down a lot faster.
Properly maintained filters make your pool water sparkling clean, besides facilitating all the pool chemicals to work more efficiently.
- Ensure Proper Water Circulation
Circulation of water in your pool is very important in keeping your pool clean and healthy. To get your water thoroughly filtered, you must run your pool pump approximately eight hours a day.
Adjust the jets returning water to produce slow, continuous movement of the water so that the debris will not settle down in one location. Skimmer baskets and filters should be clean as well to prevent blockage, which would cause water flow to be slow.
Also, proper circulation causes the chemicals to disperse and prevents the growth of algae in stagnant points. Doing your system maintenance and checking your system from time to time should not be too much for you. It makes pool maintenance easy, all the while with dirty water.
FAQs
How can you maintain your pool in the best way?
Take a water test once every week and ensure chemicals are adjusted accordingly. Clean by taking skim off and vacuuming the bottom daily. Operate your filter long enough daily and clean it when required. Remain steadfast on these simple tasks.
What are the 3 C’s of pool cleaning?
The circulation maintains the flow of water in the filter. Cleaning refers to the act of removing junk and scrubs. In chemistry, there is the balancing of the PH and the sanitizers. All this combined avoids the majority of general pool issues.
How do I maintain my pool regularly?
Test the chlorine and pH levels two times a week. Paint walls and floor in order to guard against algae growth. When pressure increases, the filter backwashes in an empty skimmer basket. Follow these basic habits.
What is applied to maintain the swimming pools hygienically?
The most typical sanitizer that eliminates germs is chlorine. Other pools are salt systems or other sanitizer pools. Algaecides are useful in preventing green water, and clarifiers maintain the water clear.
Conclusion
Regular maintenance of your pool saves your time and costs. This will save you expensive repairs and make the water safe to all people.
Regular care means a reduction in the amount of work in comparison with the necessity of solving massive issues in the future. These simple tips make owning a swimming pool a lot easier and pleasant.
Keep in mind that it is easier to prevent than to cure problems which have already emerged. The time spent will be rewarded when you swim into clean, inviting water.
